5 thoughts on “I work in the airflow textile factory, but I feel that the wiring head is always unavailable. Is the line short? I have done airflow spinning, and what experience tells me”
Leave a Comment
You must be logged in to post a comment.
You must be logged in to post a comment.
I feel that the thread head is sucking down and start to push the skin roller
It depends on what model, the old -fashioned 601 is to rely on the feel, and put the gauze in time to introduce the gauze in a timely manner. One car is a way to connect. Titan ET320 is different. Mainly rely on the feel
Pay content for time limit to check for freenAnswer Hello, I have seen the question you consulted, and you are sorting out the answer. Please wait a while ~nI feel that the thread head is sucking down and start to push the skin rollernAsk me as I just went in, I knew what you said, but I just don’t connect how to get it.nAnswer this, you can talk to you at a colleague at work, they will understand these issues for a long time, they will understand these issuesnAre you professional?nAnswers to twist and twist and twist. The main reason for the cut -offs before twisting is when transporting fiber to condensed tanks, the fiber arrangement during the condensation and closing process is damaged by different forces, and it is caused by a advance or lagging movement. The focus is on the cotton strip. The impurities, dust, cotton beams, and unstable operation and negative pressure. After twisting, the chip is mainly due to the large loss of twisting during the twisting process, and the chinensis caused by changes in the volume and twist of the gauze.nI didn’t ask how to break it, do I ask how to pick up my skills?nAnswer the regular defects in the cotton strips in time. The cleaning effect inside the spinner is good.n6 morenBleak
Which factory is it, I am also a block of the car
Stupid, as stupid as me